PRESSING INSTRUCTIONS
APPLYING YOUR DTF TRANSFERS
FROM SLEDGE CO DESIGNS
_______________________________________________________
_________________________________________________________
NOTE: DTF Transfers may arrive with powder and moisture which is caused by the shipping process, these 2 things are unavoidable.
You will also experience moisture when the items are stored, so keep the transfers in a cool environment. To remove moisture, you may sit the transfer under a hot heat press back side up for 50 seconds.
____________________________________________________________
TIPS FOR APPLYING FOR YOUR DTF TRANSFERS:
- *All DTF transfers MUST be heat pressed on the material using a commercial grade heat press with pressure adjustments.
- ** It is NOT recommended to use an iron or easy press on these transfers. **
- Use a pressing pillow if needed on both 1st and 2nd press!
- *Settings can vary depending on material - or we can email you suggested instructions if you are pressing on something you’re not sure about.
- *Trim around the edge of the transfer to be sure no glue reside is left on the transfer.
- *We recommend to pre-press your T-shirt to smooth out any wrinkles and eliminate any moisture.
___________________________________________________________
**Please Review any & all artwork guidelines before
emailing your images.
We DO NOT make any changes to the artwork sent. **
______________________________________________________________
WASH INSTRUCTIONS
Gentle cycle or hand wash. Hang to dryl
No dry cleaners ;)
